Weight Loss Device/Slimming Device Instructions

Power On/Off:

  • To turn on the device, press the power button for 2 seconds.
  • To power off the device, press the power button for 2 seconds in the power-on state.

Mode Switching:

  • Short press the power button to switch modes in the following order: EMS -> SLIM -> RF -> SLIM+RF (combination).

Intensity Adjustment:

  • After turning on the device, short press the intensity adjustment button to adjust the intensity circularly.
  • Default intensity is 25%, followed by: 25% -> 50% -> 75% -> 100%.
  • After each mode switch, the intensity defaults to 25%.

Mode Timer:

  • Each mode operates on a timer set for 10 minutes.
  • The countdown begins after 9 minutes, and the device will automatically shut down when the timer reaches 0.
  • Switching modes within 10 minutes will restart the timer for the current mode.

Buzzer Prompts:

  • Power on: Rising tone.
  • Power off: Falling tone.
  • Mode/intensity switch: One beep.
  • Countdown or low battery: Three beeps.

Low Battery Warning:

  • When the battery voltage drops below 3.3V, the device will indicate low battery.
  • The buzzer will sound three times, and the charging indicator red light will flash five times quickly.
  • The device will automatically shut down.

Charging Information:

  • Charging voltage: 5V.
  • Charging current: 550mA.
  • During charging, the charging indicator red light flashes slowly.
  • The indicator light stays on constantly when the device is fully charged.